Mobile Codes
http://ponselonline.blogspot.com/
Here is All LG 2G and 3G service codes :
ALL LG 2G and 3G GSM mobile phones Service codes for Security lock reset and service tests/software version check, etc.
ALL LG 2G : 2945#*#
8110 & 8120 : 277634#*#
U8130 & U8138 : 47328545454#
8180 old sw : 49857465454#
8180 new sw : 492662464663#
8330 : 637664#*#
8360 : *6*41*12##
8380 : 525252#*#
--------------------------------------------------------------------------------------------------------------------------
Chinese all mobile phone CODE
*#66*# Set Factory Mode CONFIRMED
*#8375# Show Software Version CONFIRMED
*#1234# A2DP ACP Mode CONFIRMED
*#1234# A2DP INT Mode CONFIRMED
*#0000# + Send : Set Default Language CONFIRMED
*#0007# + Send : Set Language to Russian CONFIRMED
*#0033# + Send : Set Language to French CONFIRMED
*#0034# + Send : Set Language to Spanish CONFIRMED
*#0039# + Send : Set Language to Italian CONFIRMED
*#0044# + Send : Set Language to English CONFIRMED
*#0049# + Send : Set Language to German CONFIRMED
*#0066# + Send : Set Language to Thai CONFIRMED
*#0084# + Send : Set Language to Vietnamese CONFIRMED
*#0966# + Send : Set Language to Arabic CONFIRMED
More some codes for reset mobile china
*#77218114#
*#881188#
*#94267357#
*#9426*357#
*#19912006#
*#118811#
*#3646633#
-----------------------------------------------------------------------------------------------------------------------------------------
CHINESE MODELS Mobile Phone Secret CodeCHINESE MODELS:
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
set default language: *#0000# Send
set English language: *#0044# Send
set English language (new firmware): *#001# Send
Service codes "Chinese" models:
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
I-mobile Inno30, 55, 89, 90, 99, 100, A10, A20, P10, Vk200
- Set full factory *741*737381#
- Set full factory *741*7373868#
- Set full factory *741*2878#
- Set Engineer Mode *888*888#
- Check software version *888*837#
I-mobile 100 ,200 , 313
- Check software version #*888#
I-mobile 309, 310
- Check software version *0*4636#
- Test Mode *0*6268#
I-mobile 311
- Check software version #*878#
I-mobile 511
- Check software version *1222*1#
I-mobile 301, 302,308, 508, 601, 602, 603, 604, 606, 611, 901, 902
- Check software version *#159#
- Set Factory Mode *#32787#
- Set Engineer Mode *#3646633#
I-mobile 503, 506, 605, 600, 607, 608
- Set Engineer Mode ***503#
- Set Factory Mode ***504#
- Set Auto Test ***505#
I-mobile 509, 612
- Set Factory Mode *#66*#
I-mobile 504, 505, 803
- Check software version *68*48#
- Set full factory *789#
- Test Mode *#789#
I-mobile 305, 306, 315, 510, 609, 609i,516
- Check software version *#8375#
- Set Factory Mode 878
I-mobile 610
- Check software version *#22#
I-mobile J101, J102
- Test Mode *23638777*783781#
I-mobile 502, 502i, 505, k9, 802
- Check software version *201206*4636#
C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
C138, C139, C140 software version: #02#*
C155, C156, C157 software version: #02#*
C257, C261 software version: #02#*
V171, V172, V173 software version: #02#*
V175, V176, V176 software version: #02#*
C168, W220 software version: *#**837#
W208, W375 software version: #02#*
and "yes"''
*3370# Mengaktifkan ENHANCED FULL RATE Codec (EFR). Ponsel Nokia Anda akan
memakai kualitas suara terbaik, namun fitur ini memerlukan energi lebih shg
sedikit menguras daya baterai.
#3370# Menonaktifkan Enhanced Full Rate Codec (EFR)
*#4720# Mengaktifkan Hall Rate Codec. Ponsel Nokia Anda akan menggunakan
kualitas suara lebih rendah shg bisa menghemat energi baterai sekitar 30%
#4720# Menonaktifkan Half Rate Codec
*#0000# Menampilkan versi software ponsel. Baris pertama menunjukkan versi
software, baris kedua menunjukkan tgl pembuatan software, baris ketiga
menunjukkan tipe kompresi yg digunakan.
*#06# Melihat nomor international Mobile Equipment Identity (nomor IMEI)
*#7780# Mengembalikan ke setting pabrik (factory setting)
*#67705646# Mengganti Logo Operator Logo pada Nokia 3310 dan 3330
*#92702689# Memunculkan:
Serial Number (nomor serial)
Date Made (tgl pembuatan)
Purchase Date (tgl pembelian)
Date of last repair (tgl terakhir perbaikan / 0000 utk yg belum pernah diperbaiki)
Transfer User Data. Di bbrp ponsel, untuk keluar dari mode ini Anda harus merestart ponsel.
PHILIPS SECRET CODES :
*#06# -> Displays imei
*#2254*# -> Status Register: C, BS, RR, MMI, CREAT
*#2255*# -> Activate & Deactivate the "DEBUG CALL"-
*#2558*# -> The time in days, hours & minutes you are connected to the net
*#2562*# -> Not Clear; the phone reconnects to the net
*#2565*# -> Not Clear; Warmstart?
*#3333*# -> (NO) BLOCKING - list (15 Items)
*#2377*# -> "BEER": not clear, the phone waits a random time and reconnects to the net,
sometimes the phone makes a reset
*#3377*# -> Init, Flags, SIM LCK
*#3353*# -> Resets the (NO) BLOCKING - list
*#7378*# -> Name, Length, SIM phase
*#7489*# -> SECURITY CODE
*#7693*# -> You can activate & deactivate the SLEEP MODE
(when deactivated the battery will go down)
*#7787*# -> Not clear: SPURIOUS INTERRUPT
*#7948*# -> SWITCH OFF: not clear; it is a timer or something
*#8463*# -> Some information about the SLEEP MODE
Philips Genie (TCD838)
*#2337*# -> Will activate the beep signal when the cellphone reconnected to the net
Philips
#20021208# ok - 630 without SIM (erase flash)
*#7728*# - RSAV DONE
*#3849*# - ??? reboot
*#3851*# - ??? reboot
Philips 568 *01763*737381# - reset
Philips Xenium 9@9D (CT2898)
*#06# - IMEI
*#2355*# - NetMonitor
*#4732*# - "Downloading" SW 02530003
*#6837*# - "Version" SW 02530003 Pack_resid EastEurope
Only this code from *#2000*# to *#8000*# was accepted by phone.
Samsung service code :
E900 software version: *#5002*8376263#
E900 full reset: *2767*3855#
Service codes Spice:
S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS -> UART1/115200
S410 engineer mode: *#3646633#
S900 software version: *#8375#
S900 serial no: *#33778#
Service codes Philips:
S200 enable COM port: *#3338913# -> Device -> Set UART -> PS -> UART1/115200
Service codes "Chinese" models:
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
Service codes BenQ:
software version: *#300#
test mode: *#302*20040615#
Service codes Pantech:
software version: *01763*79837#
service menu: *01763*476#
reset defaults (phone/user code reset to default): *01763*737381#
Service codes VK-Mobile 3xx, 5xx :
software version: *#79#
software version: *#837#
service menu: *#85*364# (hold #)
Service codes VK200, VK2000, VK2010, VK2020, VK4000:
software version: *#79#
service menu: *#9998*8336# (hold #)
reset defaults (phone/user code reset to default): *#9998*7328# (hold #)
Service codes LG :
software version: 2945#*#
KG300 NVRAM format: 2945#*# -> menu 15
Service codes Sony-Ericsson:
J100 software version: #82#
Service codes Fly:
M100 software version: ####0000#
2040(i) reset defaults: *#987*99# Send
MX200 reset defaults: *#987*99# Send
MX200 software version: *#900# Send
SL300m reset defaults: *#987*99# Send
SL300m software version: *#900# Send
SL500m reset defaults: *#987*99# Send
SL500m software version: *#900# Send
MP500 reset defaults: *#987*99# Send
MP500 software version: *#900# Send
Set language to English: *#0044#
Set language to Russian: *#0007#
Service codes Konka :
C926 software version: *320# Send
C926 set default language: *#0000# Send
C926 set English language: *#0044# Send
Service codes GStar :
GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
Set language to English: *#0044#
Set language to Russian: *#0007#
Service codes Motorola :
Motofone F3 software version: **9999* Send
C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
C138, C139, C140 software version: #02#*
C155, C156, C157 software version: #02#*
C257, C261 software version: #02#*
V171, V172, V173 software version: #02#*
V175, V176, V176 software version: #02#*
C168, W220 software version: *#**837#
W208, W375 software version: #02#*
E900 software version: *#5002*8376263#
E900 full reset: *2767*3855#
Service codes Spice :
S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS -> UART1/115200
S410 engineer mode: *#3646633#
S900 software version: *#8375#
S900 serial no: *#33778#
Service codes Philips:
S200 enable COM port: *#3338913# -> Device -> Set UART -> PS -> UART1/115200
Samsung Unlock Online Samsung Online Unlock Software
This software will allow you to connect to an online unlocking server that will directly unlock your Samsung handsets within seconds.
You will need a data cable to connect your phone to the PC in order to unlock it. The software unlocks the following models:
A501, A701, A706, A707, A727, C120, C128, C130, C140, C200, C210, C225, C230, C250, C300, C400, C450, D100, D410, D415, D418, D428, D500, D508, D510, D520. D600, D608, D710, D720, D730, D800, D820, D830, D840, D900i, E100, E105, E200, E236, E300, E310, E315, E316, E318, E330, E340, E350, E360, E370, E380, E400, E490, E500, E530, E570, E600, E610, E620, E630, E640, E650, E700, E710, E715, E720, E730, E750, E760, E770, E790, E800, E810, E820, E840, E850, E860, E870, E880, E900, E906, E910, F300, F520, i300, i300x, i320, i600, i607, i700, i739i, M300, P110, P300, P310, P400, P710, P730, P735, P910, P920, Q100, Q105, Q200, Q300, Q400, Q605, S100, S200, S300, S341i, S342i, S400i, S400i, S401i, S410i, S500, S500i, S501i, S730i, T309, T609, T629, T809, U100, U300, U600, U700, V100, V200, V804, X100, X105, X120, X130, X140, X150, X156, X160, X168, X200, X210, X300, X400, X430, X450, X460, X461, X475, X480, X481, X490, X495, X500, X510, X520, X530, X600, X610, X620, X630, X640, X650 X660, X670, X680, X688, X700, X800, X810, X820, X830, X900, Z100, Z105, Z107, Z110, Z130, Z140, Z140v, Z150, Z220, Z230, Z240, Z300, Z300m, Z310, Z320i, Z360, Z370, Z400, Z500, Z500v, Z510, Z540, Z540v, Z560, Z560v, Z600, Z620, Z630, Z650i, Z700, Z710, Z720, ZM60, ZV10, ZV30, ZV40, ZV50, ZX1
SAMSUNG ALL CODE (Unlock)
Model: Samsung A300 *2767*637#
Model: Samsung A400 *2767*637#
Model: Samsung A800 *2767*637#
Model: Samsung E500 *2767*688#
In newer phones: #*7337#
Model: Samsung E700 *2767*688#
In newer phones: #*7337#
Model: Samsung E715 Turn off the phone. Put a non-accepted Simcard and turn it on. Type *#9998*3323#. Press Exit. Choose menu #7. After phone reboots type *0141# and hit the Call button. Turn off and insert another Simcard. Turn on. The code is 00000000.
In newer phones: #*7337#
Model: Samsung M100 Type *#9998*627837793#. Then type *#9998*737#. Press >/[] (Play Stop) until phone shows NCK/SPCK number. Press Exit. Type #0111*CODE# (Code is the last 8 digits of the NCK/SPCK)
Model: Samsung P400 *2767*3855#
In newer phones: *2767*927#
Model: Samsung S100 *2767*7822573738#
Model: Samsung S105 Remove Simcard. Enter *2767*7822573738# and after phone reboots, enter #0111*00000000#
Model: Samsung S300 *2767*7822573738#
Model: Samsung S307 Turn off the phone. Put a non-accepted Simcard and turn it on. Type *#9998*3323#. Press Exit. Choose menu #7. After phone reboots type *0141# and hit the Call button. Turn off and insert another Simcard. Turn on. The code is 00000000.
In newer phones: #*7337#
Model: Samsung S500 *2767*3855#
In newer phones: *2767*927#
Model: Samsung SGH600 *2767*3855# *2767*2878#
Model: Samsung SGH2100 *2767*3855# *2767*2878#
Model: Samsung V200 *2767*7822573738#
Model: Samsung X100 Turn off the phone. Put a non-accepted Simcard and turn it on. Type *#9998*3323#. Press Exit. Choose menu #7. After phone reboots type *0141# and hit the Call button. Turn off and insert another Simcard. Turn on. The code is 00000000.
In newer phones: #*7337#
Model: Samsung X600 Turn off the phone. Put a non-accepted Simcard and turn it on. Type *#9998*3323#. Press Exit. Choose menu #7. After phone reboots type *0141# and hit the Call button. Turn off and insert another Simcard. Turn on. The code is 00000000.
In newer phones: #*7337#
Model: Samsung Universal TEMPORARY UNLOCK: Put a non-accepted Simcard and turn it on. Type *#9998*3323#. Press Exit. You will get a new menu. Select Malloc Fail.
In newer phones: #*7337#
Secret Code Samsung
*#8999*228# display battery capacity and temperature / voltage
*523# adjust display contrast
*636# display storage capacity
*778# display SIM card information
*324# The network checkout (engineering model)
*289# ringtone test
*842# Vibrate test
*782# show date and alarm clock
*246# show the memory capacity
*638# show network information
*#06# show IMEI number
*#9999# show software version
*837# Samsung hardware version
C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
C138, C139, C140 software version: #02#*
C155, C156, C157 software version: #02#*
C257, C261 software version: #02#*
V171, V172, V173 software version: #02#*
V175, V176, V176 software version: #02#*
C168, W220 software version: *#**837#
W208, W375 software version: #02#*
and "yes"''
PHILIPS SECRET CODES :
*#06# -> Displays imei
*#2254*# -> Status Register: C, BS, RR, MMI, CREAT
*#2255*# -> Activate & Deactivate the "DEBUG CALL"-
*#2558*# -> The time in days, hours & minutes you are connected to the net
*#2562*# -> Not Clear; the phone reconnects to the net
*#2565*# -> Not Clear; Warmstart?
*#3333*# -> (NO) BLOCKING - list (15 Items)
*#2377*# -> "BEER": not clear, the phone waits a random time and reconnects to the net,
sometimes the phone makes a reset
*#3377*# -> Init, Flags, SIM LCK
*#3353*# -> Resets the (NO) BLOCKING - list
*#7378*# -> Name, Length, SIM phase
*#7489*# -> SECURITY CODE
*#7693*# -> You can activate & deactivate the SLEEP MODE
(when deactivated the battery will go down)
*#7787*# -> Not clear: SPURIOUS INTERRUPT
*#7948*# -> SWITCH OFF: not clear; it is a timer or something
*#8463*# -> Some information about the SLEEP MODE
Philips Genie (TCD838)
*#2337*# -> Will activate the beep signal when the cellphone reconnected to the net
Philips
#20021208# ok - 630 without SIM (erase flash)
*#7728*# - RSAV DONE
*#3849*# - ??? reboot
*#3851*# - ??? reboot
Philips 568 *01763*737381# - reset
Philips Xenium 9@9D (CT2898)
*#06# - IMEI
*#2355*# - NetMonitor
*#4732*# - "Downloading" SW 02530003
*#6837*# - "Version" SW 02530003 Pack_resid EastEurope
Only this code from *#2000*# to *#8000*# was accepted by phone
*#0003* (kode rahasia 8 digit)# SP Unlock
*#06# Check nomor IMEI
**04* PIN lama*PIN baru*PIN baru# Mengubah PIN (Personal Identity Number)
Mengubah bahasa :
Otomatis : *#0000# + tombol call
Inggris : *#0001# + tombol call
Yunani : *#0030# + tombol call
Belanda : *#0031# + tombol call
Perancis : *#0032# + tombol call
Spanyol : *#0034# + tombol call
Italia : *#0039# + tombol call
Jerman : *#0049# + tombol call
Turki : *#0090# + tombol call
>*<<*<* Melihat service menu dan versi software
*#0000# Merubah bahasa menjadi bahasa inggris / english
*<<* Mengunci layanan provider
*#06# Menampilkan nomor IMEI (International Mobile Equipment Identity)
<**< Untuk mengunci SIM Card
**04 *0000 *0000 *0000# Mengakses ponsel tanpa SIM Card
Service codes BenQ:
software version: *#300#
test mode: *#302*20040615#
Service codes Pantech:
software version: *01763*79837#
service menu: *01763*476#
reset defaults (phone/user code reset to default): *01763*737381#
software version: *01763*79837#
Service codes VK-Mobile **x, 5xx:
software version: *#79#
software version: *#837#
service menu: *#85*364# (hold #)
Service codes VK200, VK2000, VK2010, VK2020, VK4000:
software version: *#79#
service menu: *#9998*8336# (hold #)
reset defaults (phone/user code reset to default): *#9998*7328# (hold #)
Service codes Fly:
2040(i) reset defaults: *#987*99# Send
MX200 reset defaults: *#987*99# Send
MX200 software version: *#900# Send
SL300m reset defaults: *#987*99# Send
SL300m software version: *#900# Send
SL500m reset defaults: *#987*99# Send
SL500m software version: *#900# Send
MP500 reset defaults: *#987*99# Send
MP500 software version: *#900# Send
Set language to English: *#0044#
Set language to Russian: *#0007#
M100 software version: ####0000#
Service codes Konka:
C926 software version: *320# Send
C926 set default language: *#0000# Send
C926 set English language: *#0044# Send
Service codes GStar:
GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
Set language to English: *#0044#
Set language to Russian: *#0007#
ZTE Mobile:
1- *938*737381#
2- PHONE WILL DIPLAYED DONE
3- POWER OFF YOUR PHONE AND POWER ON AGAIN
alcatel:>E205
unlocking phone code,only press***847# without simcard
Service codes Motofone-F3:
Motofone F3 software version: **9999* Send
***300* Set SIM Pin
***310* / ***311* SIM Pin ON | OFF
***000* Reset Factory settings
***644* Set Voicemail number
***260* / ***261* Auto keypad lock ON | OFF
***510* / ***511* Voice Prompts ON | OFF
***160* / ***161* Restricted Calling (Phonebook only) ON | OFF
***200608* Send: software version
***200606* Send: software version
***200806* Send: flex version
***250* / ***251* Keypad tones ON | OFF
***470* Select time format
***500* /***501* Prepaid Balance Display ON | OFF
***520* Change language
http://ponselonline.blogspot.com/
 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| All the logos and stuff are the property of their respective owners.. Site best viewed on 800x600 resolution, Internet Explorer 6.x or higher Web-Site designed, developed, webmastered and owned by: Muhammad Mahad Azad. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
